Ingersoll Rand 47578999001 85561207 Air-Cooled Hose Service Configuration

Where It Excels in Industrial Use

• Designed as a consolidated service configuration combining the Ingersoll Rand 47578999001 air-cooled hose package for Sierra 90–150 applications with the specified 85561207 hydraulic hose.

• Supports planned compressor maintenance where a long flexible hose assembly must be replaced within the applicable service circuit.

• Suitable for industrial compressed-air installations where secure hydraulic hose routing, vibration resistance, and dependable connection integrity are important.

• The 85561207 hose is identified as a 1.00 × 56.00-inch hydraulic hose with a JIC 37-degree straight connection and a 90-degree elbow connection.

• Provides maintenance teams with a defined procurement reference for the requested hose package and individual replacement hose while preserving the specified dimensional and connection configuration.

Key Strengths at a Glance

• Air-cooled service package: 47578999001 is identified as an air-cooled hose package for Ingersoll Rand Sierra 90–150 applications.

• Hydraulic hose construction: 85561207 is a 1.00 × 56.00-inch hydraulic hose designed for compatible Ingersoll Rand compressed-air equipment.

• JIC connection interface: The hose uses a JIC 37-degree straight connection and a 90-degree elbow connection for the applicable installation.

• Extended routing capability: The 56.00-inch hose length provides a longer flexible connection where the service circuit requires additional routing distance.

• Application-specific replacement: Correct selection depends on the compressor model, hose location, connection geometry, operating conditions, and current parts documentation.

Technical FAQs

1. What does the 47578999001 85561207 configuration represent?

It represents a complete requested service configuration combining the 47578999001 air-cooled hose package reference with the specified 85561207 hydraulic hose.

2. What is 47578999001?

47578999001 is identified as an air-cooled hose package for Ingersoll Rand Sierra 90–150 applications.

3. What is 85561207?

85561207 is an Ingersoll Rand hydraulic hose specified as 1.00 × 56.00 inches with JIC 37-degree straight and 90-degree elbow connections.

4. What type of connections does 85561207 use?

The documented hose assembly uses a JIC 37-degree straight connection at one end and a 90-degree elbow connection at the other end.

5. Why is the 90-degree elbow important?

The angled fitting establishes a defined change in direction at the connection point, helping achieve the required routing geometry without placing an excessive bend on the flexible hose.

6. Can another 1.00-inch hose of similar length replace 85561207?

No. The replacement must also match the hose construction, connection type and orientation, pressure and temperature requirements, routing geometry, and compressor-specific application.

7. What should be checked before installing 85561207?

The technician should verify the 1.00-inch nominal size, 56.00-inch length, JIC 37-degree connection configuration, hose routing, bend requirements, operating pressure, temperature conditions, and applicable equipment documentation.

8. What conditions can shorten the service life of the hose?

Excessive vibration, abrasion, pressure cycling, elevated temperature, improper routing, chemical exposure, and mechanical stress at the fittings can accelerate hose deterioration.

9. What signs indicate that the hose assembly requires inspection?

Visible abrasion, cracking, swelling, deformation, leakage, damaged fittings, deterioration of the hose surface, or abnormal movement during operation should prompt inspection.

10. What should be checked after installing the hose?

The technician should confirm correct fitting engagement and orientation, ensure the hose is free from twisting or excessive bending, maintain adequate clearance, and check the circuit for leakage during the applicable operational test.