Ingersoll Rand 47578999001 85561231 Air-Cooled Hose Service Configuration

Where It Excels in Industrial Use

• The complete 47578999001 85561231 configuration combines the Ingersoll Rand Sierra 90–150 air-cooled hose package reference with the specified hydraulic hose for organized compressor service.

• Designed for applicable Sierra 90–150 air-cooled rotary screw compressor installations where reliable hydraulic or cooling-circuit hose connections are essential to ongoing equipment operation.

• Supports maintenance activities in manufacturing plants, process facilities, utilities, fabrication operations, and other industrial compressed-air environments.

• The 85561231 hose provides a 1.00-inch hydraulic hose construction with a nominal 62.00-inch length, supporting fluid routing within the applicable compressor system.

• Provides maintenance teams with a consolidated reference for planned hose replacement and service preparation while retaining the original equipment part-number identification.

Key Strengths at a Glance

• Sierra 90–150 service alignment: 47578999001 is identified as an air-cooled hose package for the Sierra 90–150 platform.

• Hydraulic hose construction: 85561231 is identified as a 1.00 × 62.00 hose for applicable Ingersoll Rand compressor equipment.

• Connection compatibility: The specified hose is listed with a female JIC 37-degree swivel straight connection, supporting controlled installation into the designated circuit.

• Fluid-routing support: Properly installed hose assemblies help maintain reliable fluid circulation between connected compressor-system components.

• Maintenance-ready configuration: Combining the package reference with the specified hose provides a practical procurement and service reference for planned maintenance.

Technical FAQs

1. What is the 47578999001 85561231 configuration used for?

It combines the 47578999001 Sierra 90–150 air-cooled hose package reference with the specified 85561231 hydraulic hose as one complete service configuration.

2. What type of hose is 85561231?

85561231 is identified as a hydraulic hose with a nominal 1.00-inch size and 62.00-inch length.

3. What connection is associated with 85561231?

The hose is identified with a female JIC 37-degree swivel straight connection, subject to confirmation against the installed compressor configuration.

4. Which compressor platform is associated with 47578999001?

47578999001 is identified as an air-cooled hose package for applicable Ingersoll Rand Sierra 90–150 compressor configurations.

5. What should be checked before installing 85561231?

The technician should verify the compressor model, hose routing, connection type, hose length, fitting orientation, and existing part number before installation.

6. Why is correct hose routing important?

Correct routing helps prevent excessive bending, abrasion, twisting, heat exposure, or interference with adjacent compressor components that could shorten hose service life.

7. Can 85561231 be replaced with a hose having the same nominal diameter?

No. Replacement selection should also account for length, connection type, pressure rating, temperature capability, routing requirements, and the compressor-specific application.

8. What conditions can accelerate hydraulic hose deterioration?

Elevated temperature, vibration, pressure cycling, abrasion, chemical exposure, improper routing, and excessive bending can contribute to premature hose deterioration.

9. What should be inspected when replacing the hose?

The technician should inspect the mating fittings, sealing surfaces, clamps or supports, surrounding components, and the complete hose route for leakage, damage, contamination, or abnormal movement.

10. What should be checked after installation?

The hose should be correctly seated and routed, fittings should be secured according to the applicable service procedure, and the system should be inspected for leakage or abnormal hose movement during controlled operation.