Ingersoll Rand 47578999001 85575108 Air-Cooled Hose Service Configuration

Where It Excels in Industrial Use

• The complete 47578999001 85575108 configuration combines the Ingersoll Rand Sierra 90–150 air-cooled hose package reference with the specified 85575108 hose assembly for organized compressor service.

• Designed for applicable Sierra 90–150 air-cooled rotary screw compressor installations where dependable hose connections are important to maintaining the integrity of the compressor fluid circuit.

• Well suited to manufacturing plants, process-air facilities, utilities, fabrication operations, and other industrial environments using compatible Ingersoll Rand compressor systems.

• The 85575108 hose is an 18-inch hose assembly with standard ORFS connections at both ends, providing a compact connection between designated compressor-system components.

• Provides maintenance personnel with a consolidated procurement reference for planned hose replacement while retaining the specific Ingersoll Rand part numbers required for service identification.

Key Strengths at a Glance

• Sierra 90–150 alignment: 47578999001 is identified as an air-cooled hose package for the Sierra 90–150 platform.

• Compact hose assembly: 85575108 is specified as an 18-inch hose with standard ORFS connections at both ends.

• Secure connection interface: ORFS fittings provide a defined connection interface suited to the applicable compressor fluid circuit.

• Service routing support: Correctly installed flexible hose assemblies accommodate the routing and movement requirements of compressor equipment while maintaining circuit integrity.

• Maintenance-focused configuration: The combined reference simplifies parts identification for scheduled inspection, hose replacement, and service preparation.

Technical FAQs

1. What is the 47578999001 85575108 configuration used for?

It combines the 47578999001 Sierra 90–150 air-cooled hose package reference with the specified 85575108 hose assembly as one complete service configuration.

2. What type of hose is 85575108?

85575108 is an 18-inch hose assembly with standard ORFS connections at both ends.

3. What connection arrangement does 85575108 use?

The hose uses standard ORFS fittings at both ends, subject to verification against the specific compressor connection arrangement.

4. Which compressor platform is associated with 47578999001?

47578999001 is identified as an air-cooled hose package for applicable Ingersoll Rand Sierra 90–150 compressor configurations.

5. Why are ORFS connections important in a compressor hose assembly?

ORFS connections provide a defined sealing interface that helps maintain fluid-system integrity when the hose is correctly installed and the mating components are in suitable condition.

6. What should be checked before installing 85575108?

The technician should verify the compressor model, hose routing, connection type, hose length, fitting orientation, and installed part number before replacement.

7. Can 85575108 be replaced with another 18-inch hose?

Not solely on the basis of length. Replacement selection should also confirm hose construction, fitting type, connection orientation, pressure and temperature requirements, and compressor-specific application.

8. What conditions can shorten hose service life?

Excessive vibration, heat exposure, abrasion, pressure cycling, contamination, improper routing, and excessive bending can contribute to premature hose deterioration.

9. What should be inspected when replacing this hose?

The technician should inspect the hose fittings, mating ports, sealing surfaces, clamps or supports, surrounding components, and the complete routing path for leakage, damage, or interference.

10. What should be checked after installation?

The hose should be correctly routed and secured, the ORFS connections should be properly seated, and the system should be inspected for leakage or abnormal movement during controlled operation.