Ingersoll Rand 47579627001 23661168 Water-Cooled Hose Service Configuration

Where It Excels in Industrial Use

• The complete 47579627001 23661168 configuration combines the Ingersoll Rand Sierra 90–150 water-cooled hose package reference with the specified 23661168 hose assembly for planned compressor service.

• Designed for applicable water-cooled Sierra 90–150 rotary screw compressor installations where reliable flexible connections are required within the compressor fluid circuit.

• Well suited to manufacturing plants, process-air facilities, utilities, fabrication operations, and other industrial environments requiring dependable compressor service infrastructure.

• The 23661168 hose is a Teflon assembly measuring approximately 0.50 × 14.50 inches, with a straight ORFS connection at one end and a short 90-degree ORFS connection at the other.

• Provides maintenance personnel with a consolidated reference for hose inspection and replacement while preserving the specific Ingersoll Rand package and component identification.

Key Strengths at a Glance

• Sierra 90–150 water-cooled application: 47579627001 is identified as a water-cooled hose package for Sierra 90–150 configurations.

• Teflon hose construction: 23661168 is specified as a 0.50 × 14.50-inch Teflon hose assembly for applicable Ingersoll Rand compressed-air equipment.

• Angled connection arrangement: The straight-to-90-degree ORFS configuration supports routing where a compact directional change is required.

• Compact installation profile: The relatively short hose length is suited to closely positioned compressor-system connection points.

• Maintenance-focused configuration: The combined reference simplifies identification during planned hose inspection, replacement, and water-cooled compressor maintenance.

Technical FAQs

1. What is the 47579627001 23661168 configuration used for?

It combines the 47579627001 Sierra 90–150 water-cooled hose package reference with the specified 23661168 hose assembly as one complete service configuration.

2. What type of hose is 23661168?

23661168 is identified as a Teflon hose assembly with a nominal 0.50-inch size and approximately 14.50-inch length.

3. What connection arrangement does 23661168 use?

The hose uses a straight ORFS connection at one end and a short 90-degree ORFS connection at the other end.

4. Which compressor platform is associated with 47579627001?

47579627001 is identified as a water-cooled hose package for applicable Ingersoll Rand Sierra 90–150 compressor configurations.

5. Why is the 90-degree fitting important on this hose assembly?

The angled fitting provides a controlled change in connection direction, helping the hose follow the designated routing without imposing unnecessary bending or twisting at the connection.

6. What should be checked before installing 23661168?

The technician should verify the compressor model, hose routing, hose length, fitting orientation, connection type, and existing part number against current service documentation.

7. Can a straight-ended hose of the same length replace 23661168?

No. The fitting orientation is part of the hose assembly specification, so a replacement must match the required connection geometry as well as hose construction, size, length, and operating requirements.

8. What conditions can shorten the service life of this hose?

Excessive vibration, heat exposure, abrasion, pressure cycling, twisting, contamination, and incorrect routing can contribute to premature hose deterioration.

9. What should be inspected when replacing 23661168?

The technician should inspect both hose fittings, mating ports, sealing surfaces, routing supports, nearby components, and the complete hose path for leakage, damage, or mechanical interference.

10. What should be checked after installation?

The hose should be correctly routed without excessive bending or twisting, both ORFS connections should be properly seated, and the system should be checked for leakage or abnormal hose movement during controlled operation.