Ingersoll Rand 47579627001 23688237 Water-Cooled Hose Service Configuration

Where It Excels in Industrial Use

• The complete 47579627001 23688237 configuration combines the Ingersoll Rand Sierra 90–150 water-cooled hose package with the specified 23688237 hose assembly for planned compressor service.

• Designed for applicable water-cooled Sierra 90–150 rotary screw compressor installations where dependable flexible connections are required within the compressor fluid and piping circuits.

• Well suited to manufacturing plants, process-air facilities, utilities, fabrication operations, and other industrial environments where reliable compressor operation depends on properly maintained fluid connections.

• The 23688237 hose is a Teflon construction measuring approximately 0.38 × 17.50 inches and uses straight ORFS connections at both ends.

• Provides maintenance personnel with a consolidated procurement and service reference for hose inspection or replacement while retaining the specified Ingersoll Rand package and component numbers.

Key Strengths at a Glance

• Sierra 90–150 water-cooled application: 47579627001 is identified as a water-cooled hose package for applicable Sierra 90–150 compressor configurations.

• Teflon hose construction: 23688237 is specified as a 0.38 × 17.50-inch Teflon hose assembly for applicable Ingersoll Rand compressed-air equipment.

• Straight ORFS interfaces: Straight ORFS connections at both ends provide a defined connection arrangement for the designated compressor piping system.

• Compact routing profile: The approximately 17.50-inch hose length supports connections between closely positioned components while accommodating normal vibration and movement.

• Service-focused configuration: The combined reference simplifies identification during planned hose inspection, replacement, and water-cooled compressor maintenance.

Technical FAQs

1. What is the 47579627001 23688237 configuration used for?

It combines the 47579627001 water-cooled hose package reference with the specified 23688237 hose assembly as one complete service configuration.

2. What type of hose is 23688237?

23688237 is identified as a Teflon hose with a nominal 0.38-inch size and approximately 17.50-inch length.

3. What connection arrangement does 23688237 use?

The hose is specified with straight ORFS connections at both ends.

4. Which compressor platform is associated with 47579627001?

47579627001 is identified as a water-cooled hose package for applicable Ingersoll Rand Sierra 90–150 compressor configurations.

5. What is the purpose of the flexible hose in the compressor system?

The hose provides a flexible connection within the designated piping circuit while accommodating normal vibration and limited movement between connected compressor components.

6. What should be checked before installing 23688237?

The technician should verify the compressor model, serial number, hose routing, connection type, hose length, fitting orientation, and installed part number against current service documentation.

7. Can another 0.38-inch hose of similar length be substituted?

No. Replacement selection should also confirm hose construction, exact length, connection type, pressure and temperature requirements, routing, and compressor-specific application.

8. What operating conditions can shorten hose service life?

Excessive vibration, heat exposure, abrasion, pressure cycling, twisting, contamination, and improper routing can contribute to premature hose deterioration.

9. What should be inspected when replacing 23688237?

The technician should inspect the hose, ORFS fittings, mating ports, sealing surfaces, supports, routing path, and adjacent components for leakage, damage, contamination, or mechanical interference.

10. What should be checked after installation?

The hose should be correctly routed without excessive bending or twisting, both ORFS connections should be properly seated, and the system should be inspected for leakage or abnormal hose movement during controlled operation.