Bently Nevada PLC

  1. Home
  2. Products
  3. Bently Nevada PLC
  4. Bently Nevada 330101-00-16-05-11-05 3300 XL 8 mm Proximity Probe
Bently Nevada 330101-00-16-05-11-05 3300 XL 8 mm Proximity Probe

Bently Nevada 330101-00-16-05-11-05 3300 XL 8 mm Proximity Probe

0.0
Points

Brand:Bently Nevada PLC
Item No.:330101-00-16-05-11-05
Product Origin:USA
Product Dimensions:Total Length: 0.5 meters
Product Weight:0.162 kg
Payment:T/T, Western Union, Credit Card
Goods_stock:15
Shipping Port:Xiamen, China
Lead Time:1-3 Days
Condition:Brand New And Original
Warranty:1 Year
Certificate:COO

Add to cart

Introduction

The Bently Nevada 330101-00-16-05-11-05 3300 XL 8 mm Proximity Probe is designed for non-contact shaft measurement in industrial rotating machinery. It forms part of the 3300 XL 8 mm proximity transducer product family and is used with a compatible Proximitor sensor to monitor shaft vibration and relative position.

Using eddy-current sensing technology, the probe detects changes in the gap between its sensing tip and a conductive target. This measurement approach is widely used in machinery condition monitoring, where continuous shaft movement information helps operators assess equipment performance and identify developing mechanical problems.

This particular configuration features a 0.5-meter integral cable. Selecting the correct cable length and matching extension cable is important when integrating the probe into an existing monitoring channel. Maintenance teams should verify the full part number and system requirements before ordering a replacement.

We supply Bently Nevada proximity probes and related machinery monitoring components for industrial maintenance, repair, and equipment support. Contact us for a quotation, availability information, or assistance checking the required model.

Technical Specifications

Parameter

Specification

Manufacturer

Bently Nevada

Product Series

3300 XL

Model

330101-00-16-05-11-05

Product Type

8 mm Proximity Probe

Sensing Principle

Eddy Current

Probe Tip Diameter

8 mm

Integral Cable Length

0.5 meters

Mounting Thread

3/8-24 UNF

Probe Construction

Standard Proximity Probe

Compatible System

3300 XL 8 mm Proximity Transducer System

Total Length

0.5 meters

Weight

0.162 kg / 0.36 lb

Recommended Related Models

The following products are associated with Bently Nevada's 3300 XL 8 mm proximity measurement system. They have different configurations and should be checked individually before selection.

Model

Product Description

330101-00-16-10-02-00

3300 XL 8 mm Proximity Probe

330102-00-20-10-02-00

3300 XL 8 mm Proximity Probe with Armor

330103-00-05-10-02-00

3300 XL 8 mm Proximity Probe, M10 × 1 Thread

330104-00-20-10-02-00

3300 XL 8 mm Proximity Probe with Armor, M10 × 1 Thread

330180-50-00

3300 XL 8 mm Proximitor Sensor

Popular Related Models

These Bently Nevada components may also be relevant when maintaining or expanding a 3300 XL proximity measurement installation.

Model

Product Description

330130-040-00-00

3300 XL Extension Cable

330190-040-00-00

3300 XL ETR Extension Cable

3300/12

3300 Power Supply

3300/03

3300 System Monitor

3300/16

2-Channel Vibration Monitor

When sourcing a replacement, confirm the complete probe part number and the existing system configuration. This helps ensure that the selected probe, extension cable, and Proximitor sensor are suitable for the intended installation.


Applications

The Bently Nevada 330101-00-16-05-11-05 is a 3300 XL 8 mm proximity probe designed for non-contact measurement of shaft vibration and position in rotating machinery. Based on eddy-current technology, it detects changes in the gap between the probe tip and a conductive target, providing measurement signals through a compatible Proximitor sensor.

Its compact 0.5-meter cable configuration makes it suitable for installations where the probe-to-connection distance is relatively short. Typical applications include:

  • Steam turbines: Monitoring shaft vibration and relative shaft displacement.

  • Gas turbines: Supporting machinery protection and condition monitoring.

  • Industrial compressors: Measuring shaft movement in high-speed rotating equipment.

  • Centrifugal pumps: Providing non-contact shaft monitoring for critical pump assemblies.

  • Power generation systems: Supporting continuous monitoring of rotating machinery.

  • Petrochemical facilities: Integrating shaft measurement into equipment protection systems.

For reliable operation, the probe must be paired with the appropriate extension cable and Proximitor sensor according to the complete transducer system configuration.


Advantages

Non-Contact Measurement Technology

The 3300 XL 8 mm probe uses eddy-current sensing, allowing it to monitor shaft movement without direct contact. This measurement method is suitable for continuous monitoring of rotating machinery.

Compact Cable Configuration

The 0.5-meter integral cable is intended for installations requiring a short probe cable. It can be incorporated into a correctly matched transducer arrangement with the appropriate extension cable.

Consistent 3300 XL System Integration

The probe belongs to Bently Nevada's established 3300 XL 8 mm product family. Its electrical characteristics are designed for use within a compatible proximity transducer system.

Suitable for Critical Machinery Monitoring

When installed and calibrated correctly, the probe supports shaft vibration and position measurements used by machinery monitoring and protection equipment.

Practical Replacement Identification

The complete model number identifies a specific probe configuration. Checking the full part number helps maintenance teams distinguish it from versions with different cable lengths, connector arrangements, or mounting options.


Technical FAQs

Q1: What is the primary purpose of the 330101-00-16-05-11-05?

A: It is a proximity probe used for non-contact measurement of shaft vibration and position. It senses the gap between the probe tip and a conductive target and works with a compatible Proximitor sensor.

Q2: What does 8 mm refer to in the product name?

A: The 8 mm designation refers to the nominal diameter of the probe sensing tip. This is a defining feature of the Bently Nevada 3300 XL 8 mm proximity probe family.

Q3: How does the probe measure shaft movement?

A: The probe uses eddy-current sensing. Changes in the distance between its sensing tip and the conductive shaft surface produce changes in the electrical response. The Proximitor sensor processes this response to provide a usable measurement signal.

Q4: What is the significance of the 0.5-meter cable configuration?

A: It identifies the length of the probe's integral cable. The shorter cable is intended for installations where the probe connection is relatively close to the measurement point. The overall system cable arrangement must still meet the required electrical configuration.

Q5: Which Proximitor sensor should be used with this probe?

A: A compatible Bently Nevada 3300 XL 8 mm Proximitor sensor is required. The sensor and extension cable must be selected according to the complete probe configuration and the specified system length.

Q6: Can this probe be used for both vibration and position monitoring?

A: Yes. In a correctly configured measurement channel, the probe can provide signals used for shaft vibration and relative shaft position monitoring. The application depends on the monitoring system, probe installation, and channel setup.

Q7: What should be checked before replacing an existing proximity probe?

A: Verify the complete part number, probe mounting arrangement, integral cable length, connector type, and compatibility with the installed Proximitor sensor and extension cable. Physical dimensions and electrical configuration should also be checked against the equipment documentation.

Q8: What are common reasons for an unstable probe signal?

A: Possible causes include an incorrect probe gap, damaged cable, loose connector, poor grounding, unsuitable target material, or an incompatible sensor. Inspecting the complete transducer chain can help identify the source of the problem.

Q9: Does the probe require physical contact with the rotating shaft?

A: No. It operates without touching the shaft. The sensing tip is positioned at a specified gap from the conductive target, allowing continuous measurement while the machinery is running.

Q10: Can the 330101-00-16-05-11-05 replace other 3300 XL 8 mm models?

A: Not necessarily. Models in the same product family may have different cable lengths, mounting configurations, connector options, or other ordering characteristics. Always compare the complete part numbers and verify system compatibility before replacement.


Look forward to your comments!Comment
Latest comments
Tags:
Need Assistance? Chat with Us on WhatsApp!
Need Assistance? Click to Inquire
Back to top