Ingersoll Rand 47579630001 23113533 Air-Cooled Hose Maintenance Configuration

Where It Excels in Industrial Use

• Designed for maintenance programs supporting Ingersoll Rand IRN 55–75 kW oil-free air-cooled compressor systems.

• Combines air-cooled hose package 47579630001 with hydraulic hose 23113533 as a complete requested service configuration.

• Well suited to planned maintenance where replacement of compressor hose assemblies is required to maintain reliable fluid and air-system connections.

• Appropriate for industrial compressor installations where hose condition, routing, sealing, and connection integrity are important to dependable operation.

• Provides a practical replacement configuration for service teams maintaining applicable IRN 55–75 kW oil-free compressor equipment.

Key Strengths at a Glance

• Air-cooled service application: 47579630001 is identified as an air-cooled hose package for IRN 55–75 kW oil-free compressors.

• Hydraulic hose integration: 23113533 is a hydraulic hose measuring approximately 2.00 × 23.50, with straight JIC 37° connections and brass fittings.

• Maintenance-oriented configuration: The paired references address hose replacement within the applicable compressor service arrangement.

• Connection integrity: Properly matched hose assemblies help maintain secure connections and reduce the risk of leakage or pressure loss.

• Service compatibility: Application should be confirmed against the compressor model, configuration, and serial number before installation.

Technical FAQs

1. What is Ingersoll Rand 47579630001?

47579630001 is an air-cooled hose package identified for IRN 55–75 kW oil-free compressor systems.

2. What is the function of 23113533?

23113533 is a hydraulic hose used within the applicable compressor fluid or hydraulic connection arrangement, with a nominal 2.00 × 23.50 specification.

3. What type of fittings are used on 23113533?

23113533 is identified with straight JIC 37° connections and brass fittings.

4. How should 23113533 be installed?

The hose should be routed through its designated path without twisting, excessive bending, abrasion, or contact with hot or moving components, while the fittings should be tightened according to the applicable service procedure.

5. Can the hose be substituted with a general-purpose hydraulic hose?

Substitution should not be made solely on dimensional similarity because pressure rating, fitting geometry, material compatibility, temperature capability, and routing requirements must also match the original application.

6. What operating conditions should be considered?

The replacement hose should be suitable for the pressure, temperature, fluid, vibration, and mechanical movement conditions present in the specific compressor installation.

7. What should be inspected before replacing the hose?

Technicians should inspect the existing hose for cracking, abrasion, swelling, leakage, damaged fittings, deformation, and evidence of contact with adjacent components.

8. Why is correct hose routing important?

Correct routing prevents excessive bending and mechanical stress while maintaining adequate clearance from heat sources, rotating components, and other equipment that could damage the hose.

9. Does 47579630001 apply to every IRN 55–75 kW compressor?

The package is identified for IRN 55–75 kW oil-free air-cooled applications, but exact applicability should still be verified against the compressor model, configuration, and serial number.

10. What should be checked after installation?

After installation, the technician should verify fitting security, hose routing, clearance, and system integrity before returning the compressor to normal service.