Ingersoll Rand 47579630001 85558864 Air-Cooled Hose Maintenance Configuration

Where It Excels in Industrial Use

• Designed for maintenance applications on applicable Ingersoll Rand IRN 55–75 kW oil-free compressor systems using the air-cooled configuration.

• Combines air-cooled hose package 47579630001 with 85558864, a hydraulic hose specified at approximately 0.50 × 14.00.

• Well suited to planned maintenance where replacement of original-equipment hose assemblies is required to preserve reliable fluid routing and connection integrity.

• Appropriate for industrial compressor installations where hoses are exposed to vibration, pressure fluctuations, temperature variation, and continuous operating cycles.

• Supports service teams performing targeted hose replacement while maintaining the specified dimensions and equipment interface.

Key Strengths at a Glance

• Air-cooled service application: 47579630001 is identified as an air-cooled hose package for IRN 55–75 kW oil-free compressors.

• Hydraulic hose specification: 85558864 is identified as a hydraulic hose with an approximate 0.50 × 14.00 size.

• Compact hose configuration: The 14-inch nominal length is suited to localized compressor piping connections where controlled routing is required.

• Original-equipment service reference: 85558864 is cataloged as an Ingersoll Rand hose component for compressor equipment.

• Maintenance-focused configuration: The paired references provide a practical service configuration for planned hose replacement and inspection.

Technical FAQs

1. What is Ingersoll Rand 47579630001?

47579630001 is an air-cooled hose package identified for applicable IRN 55–75 kW oil-free compressor systems.

2. What is Ingersoll Rand 85558864?

85558864 is an Ingersoll Rand hydraulic hose specified at approximately 0.50 × 14.00.

3. What is the purpose of 85558864?

85558864 provides a hydraulic hose connection within the applicable compressor service arrangement, with its exact installation position determined by the equipment configuration.

4. What should be considered when replacing 85558864?

The replacement should match the original hose diameter, length, fitting arrangement, pressure capability, temperature range, and fluid compatibility.

5. Can a generic 0.50-inch hydraulic hose replace 85558864?

A generic hose should not be substituted based on diameter alone because fitting geometry, pressure rating, temperature capability, hose construction, and connection requirements must also be compatible.

6. How should 85558864 be routed during installation?

The hose should follow the original routing and should be protected from twisting, excessive bending, abrasion, sharp edges, hot surfaces, and interference with moving components.

7. What should be inspected before installing the replacement hose?

The existing hose and adjacent connections should be checked for leakage, abrasion, cracking, deformation, damaged fittings, heat exposure, and other signs of mechanical stress.

8. Why is correct hose length important?

Correct hose length helps maintain the intended routing and prevents excessive tension, unsupported loops, sharp bends, or unnecessary contact with surrounding equipment.

9. Does 47579630001 apply to every IRN 55–75 kW compressor?

The package is identified for IRN 55–75 kW oil-free air-cooled applications, but exact applicability should be verified against the individual compressor model, configuration, and serial number.

10. What should be checked after installing 85558864?

The technician should verify fitting security, hose routing, clearance, leakage condition, and overall system integrity before returning the compressor to normal service.